Welder CV: show processes, positions and procedure qualifications that match the job

A welder CV should show that you deposit sound welds to a qualified procedure—naming the processes, positions, materials and codes you actually work to—rather than that you work primarily as a plumber, an electrician or an HVAC technician, or that you certify other welders as an inspector. Hiring managers look for current procedure qualifications (for example AWS D1.1, ASME Section IX or API 1104, with positions such as 3G, 4G or 6G), the setting (shop fabrication, field construction, pipe, structural steel, or a specialty such as stainless or sanitary work), and evidence you can meet visual or NDT acceptance criteria and keep rework down. Lead with process, position and code, keep every figure supportable, and make materials and qualification status easy to find. Keep this distinct from a plumber CV and from other trade pages: emphasize qualified welding rather than plumbing installation, electrical work or HVAC/R service, and do not present a CWI or welding-engineer role you do not hold.

Open free CV maker

Browse CV templates

Lead with processes, positions, codes and the setting you work in

Open with a short summary that states your welder title, the processes you use (SMAW, GMAW, FCAW, GTAW or others you actually run), the positions and materials you are qualified in, and the setting—shop fabrication, field structural, pipe or pipeline, maintenance, or a named specialty. Mention the governing code or specification, current WPQ or continuity records, fit-up or layout duties, and the welding equipment or wire and electrode types only when they are current and you can discuss them.

Mirror posting language only when it matches work you have done. Do not claim a 6G pipe test, stainless or exotic alloy work, or a code you have not welded to. Do not list a process you have only run in school unless you label it as training. Helpers and tackers should label that status honestly so the CV is not read as a fully qualified production or pipe-welder resume.

Write bullets that show weld quality, production or field output and inspection results

Strong welder bullets name the setting, typical joints or materials and what you owned: fit-up, welding to a WPS, in-process checks, and closeout after visual or NDT inspection. Footage or joints completed, first-time pass rate, repair or rework rate, overtime or shutdown support, or a measured drop in rejects can help when they are honest and not the only story. Prefer documented shop, QC or inspection results over vague claims that you “welded to code.”

The fictional examples below illustrate wording only. They are not Make.CV performance claims and should not be copied as your own. Replace every figure with results you can support from traveler, production or inspection records. Do not invent a qualification, a pass rate or a process, and do not describe a partner’s weld or an inspector’s sign-off as your own certification authority.

Show welding skills without blurring inspection leadership or other trades

Group skills into readable categories such as processes and positions, materials and codes, fit-up or fabrication, and inspection readiness. Prioritize the process, position and code named in the posting when you have genuine qualifications. A short accurate list of current tests and the work you actually do beats a long inventory of every electrode or machine from a course.

Tie important skills back to experience bullets. Saying you meet acceptance criteria is more convincing when a bullet explains a first-time RT or UT pass rate, a visual reject rate, or how you corrected a fit-up issue before welding. Plumbing installation and fixture work belong on the plumber CV. Electrical and HVAC/R work belong on those trade pages. Certified welding inspector duties, procedure writing or engineering sign-off belong only on a CV for a role you actually hold. Mention pipefitting or rigging only when you did that work and can discuss it.

Choose a clean layout and review the export

Use a readable template with standard headings so processes, positions, codes and qualification dates stay easy to find. Keep dates consistent and leave room for quantified bullets. Browse Make.CV templates if you want to compare layouts before writing.

Build your CV in the free maker with live preview, then download a PDF with no watermark. Proofread qualification codes, positions and continuity dates if you include them, and confirm the exported text remains selectable before you submit.

Frequently asked questions

What qualifications should a welder list?

List current procedure qualifications that match the work, such as AWS D1.1, ASME Section IX or API 1104, with the process, material and position (for example 3G, 4G or 6G). Include continuity or last-weld dates if the employer will ask. Omit expired tests or mark them clearly as expired, and do not list a code or position you have not been tested on.

How is a welder CV different from a plumber or CWI CV?

A welder CV emphasizes processes, positions and welds accepted under a procedure. A plumber CV emphasizes licensed plumbing systems and fixtures; mention welding there only when it was part of a plumbing or piping job. A CWI or welding-inspector CV emphasizes inspection and code interpretation, not production welding. Keep those roles distinct unless you genuinely hold and are applying for both.

Can I include shop, field, structural and pipe work on one CV?

Yes when you have actually done that work and can discuss a concrete example. Lead with the mix the posting asks for—structural, pipe, shop or field—and do not list a process, alloy or position you are not qualified to weld.

How do I quantify welding work?

Use supportable joint or footage counts, first-time inspection pass rates, and rework figures without inventing results. Name the inspection method (visual, RT, UT or another method actually used). Never invent a qualification or a pass rate.