Machinist CV: show setups, tolerances and inspection to print

A machinist CV should show that you set up and run work to print—manual or CNC, with the tolerances, materials and inspection methods you actually use—rather than that you join parts as a production welder. Hiring managers look for the machines you set up (mills, lathes, grinders, or a named CNC control), your ability to hold tolerance and interpret GD&T, in-process and final inspection, and first-article or scrap results you can support. Lead with setups, materials and inspection. List NIMS credentials, a registered apprenticeship or a shop-specific qualification only when you hold them and can explain what they cover. Welding procedures, positions and WPQ records belong on the welder CV; mention welding only if you actually performed it and it is relevant to the machining job.

Open free CV maker

Browse CV templates

Name the machines, controls and print work you actually set up

Begin with your machinist title, whether you do CNC setup, CNC operation, manual machining, or a mix, and the equipment you run—vertical or horizontal mills, engine or turret lathes, grinders, EDMs, or a named control such as Fanuc, Haas, Mazak or Siemens. Mention materials you regularly cut (aluminum, steels, stainless, titanium or plastics), the tightest tolerances you actually hold, and whether you program at the control, edit CAM output, or run proven programs. Apprentices and operators who do not set up should say so clearly so the CV is not read as a setup-machinist resume.

Match the posting’s machine family and control only when you have used them. Do not claim 5-axis work, Swiss turning, close-tolerance aerospace parts, or a programming duty you have only watched. If you inspect to a first-article or production plan, name the gauges or CMM you use. Shop-specific process qualifications are worth listing when you can describe the standard they cover.

Quantify setups, tolerances and inspection without inventing scrap or FAI results

Strong machinist bullets name the part type or lot, the setup you owned, the tolerance or GD&T callout, and a result you can support: first-article acceptance, in-process checks that caught a drift, a scrap or rework rate, cycle-time improvement, or on-time closeout of a traveler. Fixture building, tool offsets, and communication with quality or programming can help when they are honest and not the only story. Prefer inspection reports and travelers over vague claims that you “held tight tolerance.”

The fictional examples below illustrate wording only. They are not Make.CV performance claims and should not be copied as your own. Replace every figure with results you can support from travelers, first-article packets or quality logs. Do not invent a tolerance, scrap percentage or machine hour, and do not describe a programmer’s or inspector’s sign-off as your own certification authority.

Present machining skills clearly, and leave production welding on a welder CV

Group skills into readable categories such as CNC or manual setups, controls and programming, materials, GD&T and print reading, and inspection tools. Prioritize the machines, controls and tolerances named in the posting when you have genuine experience. A short accurate list of the work you actually run beats a catalog of every toolroom machine from school.

Tie important skills back to experience bullets. Saying you work to GD&T is more convincing when a bullet cites a true-position or flatness callout you held and how you inspected it. A welder CV is the place for processes, positions and procedure qualifications used to join parts. On a machinist CV, mention welding only if you actually welded as part of a fabrication or repair task and the machining job cares about it. Do not recast machining-to-print work as a welding resume.

Choose a clean layout and review the export

Use a readable template with standard headings so machines, controls, tolerances and inspection evidence stay easy to find. Keep dates consistent and leave room for quantified bullets. Browse Make.CV templates if you want to compare layouts before writing.

Build your CV in the free maker with live preview, then download a PDF with no watermark. Proofread machine and control names, tolerance figures and any NIMS or apprenticeship details, and confirm the exported text remains selectable before you submit.

Frequently asked questions

What should a machinist list for machines, controls and credentials?

List the machine types and controls you actually set up or run, the materials you cut, and the inspection tools you use. Add a registered apprenticeship, journey-level status, or current NIMS credentials only when you hold them and can say which standards they cover. NIMS is optional in many shops, so do not treat it as required unless the posting asks for it.

How is a machinist CV different from a welder CV?

A machinist CV emphasizes setups, cutting to print, tolerances or GD&T, and inspection of machined features. A welder CV emphasizes welding processes, positions and procedure qualifications used to join materials. If you do both, lead with the role in the posting and keep the two kinds of work easy to tell apart.

Should I include NIMS or apprenticeship credentials?

Include them when they are current and you can explain the module or program. They can help, especially for entry or journey-level screening, but they do not replace examples of setups and inspection results. Omit expired cards or mark them clearly as expired.

How do I quantify machining work?

Use supportable lot or part counts, first-article results, scrap or rework figures, and tolerances you actually held, without inventing numbers. Name the inspection method (micrometer, comparator, CMM or another method you used). Never invent a tolerance or a scrap rate.